SpinCore Logo

LabView Information and Contributed Software



This directory contains several LabView packages contributed by our customers.

The VIs are for PulseBlaster PCI boards, model PB24-100-32k, revision SP2.   For other models and/or board revisions, a different driver (.dll file) would need to be used.  Those same VIs should also work on faster PulseBlasterESR boards.  
Chang uses PulseBlasterESR-PRO board, revision sp4a.   For other models and/or board revisions, a different driver (.dll file) would need to be used.

Here is what Chang writes in his e-mail to us:

How to use this vi?
First, you should have spinapi.dll in proper location as explained before.

Open this Vi,
Click on the "run arrow"
Set the "programming code", and click on "PG Select ?"
Set the pulse period, channels, instruction code, inst data length, etc.
Click on the "Start ?"
Now you will have pulse trains on the selected channels.
Click on the "Stop ?" in order to stop pulse.



    NOTE: General information on calling C functions from LabView is available at the following external links:

http://www.ni.com/pdf/manuals/370109b.pdf

http://zone.ni.com/devzone/conceptd.nsf/webmain/B26A875ACA51C567862567CA0055FF24?opendocument


© 2005-2007  SpinCore Technologies, Inc.